
Match blade span to the room
Measure the room's length and width and multiply to get square feet. Then use this as a starting point:
- Up to 75 sq ft (bathrooms, laundry): 29 to 36 inch blades
- 76 to 144 sq ft (bedrooms, offices): 36 to 44 inch blades
- 145 to 225 sq ft (large bedrooms, kitchens): 44 to 50 inch blades
- 226 to 400 sq ft (living rooms): 50 to 60 inch blades
- Over 400 sq ft or long rooms: a 60 inch plus fan, or two fans
Get the height right
Blades work best about 8 to 9 feet above the floor and should never be lower than 7 feet. On a standard 8 foot ceiling, a flush or low-profile mount keeps clearance safe. Taller ceilings need a downrod to bring the fan down into the room:
- 9 ft ceiling: about a 6 inch downrod
- 10 ft ceiling: about a 12 inch downrod
- 12 ft ceiling: about a 24 inch downrod
- Sloped ceilings: an angled mount rated for the pitch
Pick the right rating for Florida
Indoor fans are for indoor rooms only. A covered lanai or porch needs a damp-rated fan. Anywhere rain can reach the fan directly, choose wet-rated. In salt air, sealed motors and stainless or coated hardware last far longer.
Set the direction
In summer, run the fan counterclockwise when you look up at it, so it pushes air down. In the few cool weeks of winter, switch it to clockwise on low to move warm air off the ceiling.
Need a hand with this?
Text a photo of the fan, fixture or panel and you'll get a price by text.